Fluorescent contrast colour and with reflective tapes. Has a water-repellent finish. Two-toned. ULTIMATE STRETCH fabric that is lightweight and durable. Double stitched seams on the leg and crotch. Hidden stud fastening. Ergonomically formed trouser leg. Belt loops. D-ring. Fly with zip. Front pockets. Back pockets with reinforcement. Adjustable hammer loop. Reinforced ruler pocket. Button for knife attachment. Thigh pockets with flaps. Adjustable kneepad pockets in durable CORDURA® (500 D). Thigh pocket with phone pocket and flap with hook and loop band fastening. With print effects. Prepared for holster pockets 19450-126, which are attached with buttons. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitching. We recommend 00418-100, 00718-100, 50451-916 and 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.
- OEKO-TEX® STANDARD 100 - OEKO-TEX® STANDARD 100
- EN ISO 20471 - class 1 - EN ISO 20471 - class 1
- Hi-Vis Group Z - Hi-Vis Group Z
- OEKO-TEX® STANDARD 100
- EN ISO 20471 - class 1
- Hi-Vis Group Z
As the product is made of stretch material, a stretchable transfer must be used when printing on the product. You should choose a transfer that can be heated to a maximum of 145 degrees when being printed onto the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with a maximum logo area of (82+90 cm) 0,0500 m², (76 cm) 0,0300m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement::
- Workwear logo. Over left front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo. Over right front pocket. Max 11x6 cm/4.3x2.3 inches
- Workwear logo stretch. Left back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo stretch. Right back pocket. Max 11X4 cm/4.3x1.5 inches
- Workwear logo stretch. Horizontal on right thigh. Max 9X6 cm/3.5x2.3 inches
- Workwear logo stretch. Horizontal on left thigh. Max 9X6 cm/3.5x2.3 inches
- Workwear logo. Special placement. Contact to discuss further
- Man
- Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc. - Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc. - Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
No liability accepted for product alterations.