Fluorescent and with vertical and oblique, transverse reflective strips. Two-toned. Breathable, wind and waterproof. Taped seams. Lining in mesh material. Detachable lined hood can be adjusted to fit over a helmet via drawstring. Adjustable wire on both sides of the hood. Mesh with ventilation under sleeves - opens with zip. High collar. Ribbed inner collar. Waterproof pen pocket on the sleeve. Fastening with zip and storm flap with press studs. Zipped inner pockets under storm flap - one designed especially for a mobile with holes for headset wire and guide loops to keep wire accessible. Zipped pocket under storm flap large enough to hold a 7-inch tablet. Flap on back of jacket can be folded up for standard back length or released for extended back. Chest pocket with a zip. D-ring. Ergonomically shaped sleeves allow for great freedom of movement. Ribbed inner waistband to keep the cold out. CORDURA® fabric reinforced cuffs with press stud fastening. Front pockets with a zip.
- OEKO-TEX® STANDARD 100 - OEKO-TEX® STANDARD 100
- EN ISO 20471 - class 3 - EN ISO 20471 - class 3
- Hi-Vis Group A - Hi-Vis Group A
- EN 343 4-4-X - EN 343 4-4-X
- OEKO-TEX® STANDARD 100
- EN ISO 20471 - class 3
- Hi-Vis Group A
- EN 343 4-4-X
The product is certified with a maximum logo area of 0,0400m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement::
- Workwear logo. Left breast. Max 8x7 cm/3,1x2.7 inches
- Workwear logo. Mid-back. Max 25x20 cm/9.8x7.8 inches
- Workwear logo. Horizontal on right sleeve. Max 10x5 cm/3.9x1.9 inches
- Workwear logo. Special placement. Contact to discuss further
- Man
- Woman
- Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc. - Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc. - Craftsmen and light building
Look for this symbol if you work as a carpenter, electrician, painter, engineer, etc.
No liability accepted for product alterations.